Early Build Stage of Inmoov 
KALI NetHuner 
PinePhone PostMarketOS
Weekly blog of my projects.
iot2z is a blog of my projects that I like to show off to the world. They include INMOOV (open source robot), KISMET (wireless packet sniffing of packets, RUBIC cube solver and others.
Latest Posts
First Layer Weirdness
While printing my first layer on a 3D print, I notice that the left side was printing with a different pattern. It’s strange that its a perfect rectangle within the first layer. What could cause this? Leveling, gcode, temperature? For strange to me.
First Published Model on Thingiverse
This month I published my first 3D model on Thingiverse. The problem with many of the Inmoov head stands is that they would not hold upright and when testing the movement of head, left and right, the head fell over. The Inmoov head stand has a wide base to prevent this and by inserting theContinue reading “First Published Model on Thingiverse”
PLA Clogged in Extruder
Recently the PLA was clogged in the extruder. It started with clicking sound and rather than fixing it immediately, I thought I would wait. It’s believed it was caused by changing the PLA from HatchBox to eSUN. eSUN used a higher temperature and when it was set to 225 the clicking stopped. Later replaced withContinue reading “PLA Clogged in Extruder”
Building Right Leg of Inmoov
After about 80 hours of printing during the month of December, the right leg is completed. Printing was not so bad, however the toughest part was finding the right screws and bolts for holding it together. Deciding to make it a static leg, which means, it does not have any motors and automated movement. LaterContinue reading “Building Right Leg of Inmoov”
Loading…
Something went wrong. Please refresh the page and/or try again.
Follow Me
Get new content delivered directly to your inbox.
